A. It may seem that our product is a bit pricey, but take a closer look, you'll find that PRODUXA® is less expensive than most traditional products per application. Offering up to 15 applications per 16 Oz bottle, $1.99 per application on a mid-sized car, 15 minutes of your time, receiving the benefit of durable paint surface protection for an entire season.
A. PRODUXA® Premium is specially formulated with a combination of polymers to create a slick, glossy finish and protect finishes from bugs, water spots, and road contaminants. Ordinary waxes and paint sealants cannot offer the same level of protection and wash or wear off in a matter of weeks. PRODUXA® Premium seals and protects for months, not weeks.
A. The 16 oz bottle will generally be good for 8-15 average size car applications because you won't need as much if you pre-wash your vehicle and remove all contaminants before applying PRODUXA® Premium the first time. One coating usually lasts for up to 6 months, depending on the environmental influences.
(One application can last up to 6 months, but we recommend applying monthly for superior protection and best results)
A. The coating usually lasts for up to 6 months, depending on the environmental influences. Depending on how often you wash the car and what chemicals you use the lifespan might be shorter. For a daily driver, we recommend applying the product at least every 3-6 months to keep up the optimal protection for your vehicle. Some people apply a couple of layers in the first 24 hours to build a harder protective coating and a deeper shine. PRODUXA® Premium can also be used as a drying agent after washing to add a layer of protection as you dry your vehicle.
We do recommend applying the product periodically (once a month) so you can enjoy the shine & protection for another 6 to 12 months.
A. When you first get PRODUXA ®, wash the vehicle first, dry it, then apply PRODUXA® according to the directions on the label. When it comes time for a cleaning, you can simply use PRODUXA® Premium to clean and reapply more layers. The chances of scratching are lower than washing with soap and water since PRODUXA® is already on the surface and much slicker than soap. If the vehicle is extremely dirty or if it has been weeks or months and PRODUXA® may have worn down, then wash the car with soap, dry it, and re-apply PRODUXA® according to the directions.
We do recommend using our Lab tested PRODUXA® Shampoo: Get it here
A. You can use the product on all vehicles like Cars, Trucks, Bikes, Boats, RVs, etc. and on all surfaces made of Ceramic, Plastic, Chrome, Tile, Metal, Glass, Acrylic, Fiberglass, Granite, Marble and other stones. PRODUXA™ Premium works fantastic on stainless steel, cabinets, backsplashes, glass, mirrors, etc. as grease will wipe easily off, fingerprints won’t stick, it won’t leave behind a greasy, sticky residue, it's not flammable, and it brings out the natural look of the materials you coat.
A. Our Product is most known for its ability to quickly & easily clean any vehicle. PRODUXA® Premium contains a detergent that is safe on plastic and glass surfaces. If you use the product on household surfaces, including exterior windows and plastic or vinyl outdoor furniture, make sure you test first in an inconspicuous area. PRODUXA® Premium has not been FDA tested so we can't recommend using it on areas where food is in direct contact with the treated surface.
A. This product works excellent on all colored paints! No matter if it’s black or white or any other color.
A. The coating can be applied in direct sunlight. But we recommend to apply it at ambient temperature to a cool surface and out of the sunlight to ensure the best surface conditions and proper application. If your engine, rims, exhausts, etc. are hot, let them cool down before you apply the coating.
A. The product effectively protects any surface against harsh UV solar rays, pollution, water spots, bug or bird residues, and road grime. It won't fully repel dust, pollen etc., but makes cleaning them off easier afterward.
A. You can use PRODUXA® Premium and remove water spots (Type I). However, Hard water spots and acid rain are the hardest to remove and need some more work. We suggest removing all contaminants from the surface (including those not caused by the water spots) before applying the product for the first time.
If the water spots have etched the surface, clay will sometimes remove water-spots, or a good pre-wax cleaner. If neither of those work, they will have to be buffed out.
A. Rainwater takes pollutants and minerals out of the air. Even water for home use contains minerals. When surface water containing these minerals evaporates, the minerals are left on the surface, i.e., calcium, lime. This is what causes water spots. Over time, these minerals will "etch" into the clear coat itself, if left unprotected. The only way to prevent water spots is to remove the water from the surface.
A. Yes, it can freeze, so we recommend to store the product in a place where the temperature does not drop below 32°F or 0°C.
A. We take pride in introducing the absolute best car care products on the market, while also being totally environmentally friendly. All our formulas are non-toxic, biodegradable and 100% VOC compliant. They also contain no harsh acids or heavy solvents and are 100% free of hydrofluoric and sulfuric acids. Which means that when washing the product off, it is totally eco-friendly to drop down into the drains.
A. By Hand: (1.) For best results apply only to cool & clean surfaces out of the direct sunlight. You can use any product to clean your vehicle, bike, or surface but preferably use products without wax in it, or any synthetic "coating" for "protection" as the PRODUXA® Premium won't bond properly on the first application.
(2.) Put a small amount of PRODUXA® Premium onto a clean microfiber towel (or spray directly onto the surface you want to enhance, coat, and protect) and work into the surface in a circular motion. PRODUXA® Premium will bond with clean paint surfaces quickly.
(3.) Finally, buff the freshly applied PRODUXA® Premium with a second (clean & dry) microfiber towel to ensure PRODUXA® Premium is entirely polished into the surface, leaving an incredibly slick, streak-free, and amazing shine.
(4.) Coat one area or section at a time, move to the next and repeat the process. Apply two coats for added protection.
NOTE: You need only very little for each section. Heavily spraying only wastes the product.
If you want to add several coats of PRODUXA® Premium to your surfaces, we recommend waiting at least 24 hours between coats to ensure effective performance.
A. You can use 10% ISO alcohol or a pre-wax cleanser to quickly remove the product.
A. You shouldn't coat your fresh paint job with the product as you need to give the paint some time to "breath", to cure properly. The recommended time frame for water-based paints is generally around 30 days for a full cure, depending on the climate.
A. Yes, the product works perfectly on Ceramic coated vehicles.
A. We prefer to cut out the retail middleman and simply offer our products directly to the consumer. You can order our products directly from our Store. Some of our offers are also available on eBay and Amazon. Please be advised that if you buy from an unauthorized reseller on third-party marketplaces, we don't accept any returns/refunds. From the beginning of June 2018, all our Bottles are sealed.
A. We don't offer trial bottles at this time, but we do stand behind our 30 Day 100% Satisfaction & Money-Back Guarantee!